Ampco ZP3 ROTARY PISTON PUMPS
Ampco Pumps raises the bar with the introduction of the ZP3 Series of positive displacement pumps. The recently patented front-loading seal design of the ZP3 offers a fully CIP-able pump without modifications or loss of efficiency. The front loading design allows the seal to be easily maintained or changed and the newly designed rotor case eliminates all dead zones.
Every new Ampco ZP pump includes these standard features: 304 stainless steel gear case, stainless splash plate protecting the bearing seal face, stainless bearing retainers, 17-4ph shafts, helical gears, 4-way mounting, threaded grease zerks, anti-microbial lube and gasketed stainless steel clean-out plugs. The ZP3 Series is EHEDG Certified and in conformance with 3A sanitary standards and the ATEX directive.
Existing ZP2 and competing models can be upgraded to a ZP3 design with new rotors, seals and re-machining the existing rotor case in as little as 2 weeks. Standard delivery for a new ZP3 pump is 2 weeks.
Need it sooner? These pumps are ready to ship same day, 14 models available in the ZP1 and ZP3 line-up.
Whether you simply want to replace your existing ZP1 / ZP2 style pump or you prefer to upgrade to Ampco’s new ZP3 design with improved CIP-ability and ease of maintenance, Ampco’s ZP Series is the smart choice.
ZP3 SERIES ADVANTAGES“Ampco Pumps Company is excited to introduce our patented front loading seal design for ZP series pumps. This seal is designed to 3A standards and has passed the stringent EHEDG clean ability requirements. In addition to being fully “clean in place”, the seal can be serviced without the need to remove the rotor body and piping. Also, the front loading nature of the seal eliminates the “dead zone’ in the shaft bore. Existing ZP2 pumps (and competitors’ pumps) can be upgraded to the ZP3 design with new rotors, new seals and re-machining the existing rotor case.” explains Bob Garner, Engineering Manager.
Ampco ZP3. The new standard in positive displacement pumps.
Every new Ampco ZP pump includes these standard features: 304 stainless steel gear case, stainless splash plate protecting the bearing seal face, stainless bearing retainers, 17-4ph shafts, helical gears, 4-way mounting, threaded grease zerks, anti-microbial lube and gasketed stainless steel clean-out plugs. The ZP3 Series is EHEDG Certified and in conformance with 3A sanitary standards and the ATEX directive.
Existing ZP2 and competing models can be upgraded to a ZP3 design with new rotors, seals and re-machining the existing rotor case in as little as 2 weeks. Standard delivery for a new ZP3 pump is 2 weeks.
Need it sooner? These pumps are ready to ship same day, 14 models available in the ZP1 and ZP3 line-up.
Whether you simply want to replace your existing ZP1 / ZP2 style pump or you prefer to upgrade to Ampco’s new ZP3 design with improved CIP-ability and ease of maintenance, Ampco’s ZP Series is the smart choice.
ZP3 SERIES ADVANTAGES“Ampco Pumps Company is excited to introduce our patented front loading seal design for ZP series pumps. This seal is designed to 3A standards and has passed the stringent EHEDG clean ability requirements. In addition to being fully “clean in place”, the seal can be serviced without the need to remove the rotor body and piping. Also, the front loading nature of the seal eliminates the “dead zone’ in the shaft bore. Existing ZP2 pumps (and competitors’ pumps) can be upgraded to the ZP3 design with new rotors, new seals and re-machining the existing rotor case.” explains Bob Garner, Engineering Manager.
Ampco ZP3. The new standard in positive displacement pumps.
- Front-loading seals are located closer to the product flow, offering improved CIP-ability with no disassembly required.
- Front-loading seals allow for ease of maintenance and reduced service time.
- EHEDG certified and in conformance with 3A sanitary standards and the ATEX directive.
- As opposed to our competitors’ similar pumps, this seal is a better balanced design which generates less heat and promotes longer seal life.
- Cover design maximizes exposure of the cover o-ring to the CIP fluid.
- Free drain design improves CIP-ability while maintaining maximum pump efficiency.
- CIP holes in rotor ensure turbulent flow to the cover hub.
- Elimination of dead zones in shaft bore improves cleanability and increases seal life.
- The ZP3 pump is mounted on a ZP2 gear case, including shafts, to maximize parts interchangeability.
- Existing ZP2 pumps (and our competitors’ similar pumps) can be upgraded to the ZP3 design with new rotors, new seals and re-machining the existing rotor case.
- New pumps can be reconditioned 2 to 3 times.
Specifications:
|
|
All parts and seals are interchangeable with Wright TRA30, Waukesha Universal II and Ampco ZP3 pumps.
All seals & Parts are manufactured in the US to exacting standards of quality and workmanship. For any options not listed, please contact us at 888-289-8787.
All seals & Parts are manufactured in the US to exacting standards of quality and workmanship. For any options not listed, please contact us at 888-289-8787.
POSITIVE DISPLACEMENT REPLACEMENT PARTS
ZP3 MODELS 6-24
Ampco’s ZP Series 6 - 24 rotary piston pump replacement parts are the best value in the industry. Ampco ZP pumps are made from 304 stainless steel, stainless bearing retainers, 17-4ph shafts, helical gears, 4-way mounting, threaded grease zerks, anti-microbial lube and gasketed clean-out plugs. Please see the replacement parts below for this product. Feel free to call us if you are having trouble.
ZP3 MODELS 30-34
Ampco’s ZP Series 30 - 34 rotary piston pump replacement parts are the best value in the industry. Ampco ZP pumps are made from 304 stainless steel, stainless bearing retainers, 17-4ph shafts, helical gears, 4-way mounting, threaded grease zerks, anti-microbial lube and gasketed clean-out plugs. Please see the replacement parts below for this product. Feel free to call us if you are having trouble.
ZP3 MODELS 45-134
Ampco’s ZP Series 45 - 134 rotary piston pump replacement parts are the best value in the industry. Ampco ZP pumps are made from 304 stainless steel, stainless bearing retainers, 17-4ph shafts, helical gears, 4-way mounting, threaded grease zerks, anti-microbial lube and gasketed clean-out plugs. Please see the replacement parts below for this product. Feel free to call us if you are having trouble.
MODELS 180-224
Ampco’s ZP Series 180 - 224 rotary piston pump replacement parts are the best value in the industry. Ampco ZP pumps are made from 304 stainless steel, stainless bearing retainers, 17-4ph shafts, helical gears, 4-way mounting, threaded grease zerks, anti-microbial lube and gasketed clean-out plugs. Please see the replacement parts below for this product. Feel free to call us if you are having trouble.
