Yamada NDP 15 FDA Sanitary Pumps

Yamada® FDA Compliant Pumps for Food, Cosmetics, and pharmaceuticals.
Yamada® FDA compliant pumps are specifically designed for Food, Pharmaceutical, & Cosmetic Industries where 3A or USDA standards are not required. Pumps include 316 Stainless Steel wetted components with Passivated Satin Finish, PTFE-Coated or Polypropylene Air Motor*, Sanitary Clamp Fittings, and FDA compliant elastomers: Hytrel®, EPDM and PTFE.
Port Size Eight sizes available from 3/4" to 4" ports
Port Type Tri-clamp Sanitary Connections
Flow Ranges From 1 to 215 gallons per minute
Air Pressure From 20 to 100 PSI
Finish 20RA interior mechanical polish available on some models
Applications:

Bulk Transfer
Food Packaging
Batching
Filter Press, Utility
Tanker/Railcar Unloading
Product Transfer
Wine Pump-over
Cosmetics
Personal Hygiene

Yamada® NDP-15 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 13.5 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar® (PVDF), groundable acetal, and polypropylene construction, with a wide variety of diaphragm materials.
13.5 Gallons/Minute Max.
1/2" NPT Fluid Port Intake & Discharge Connections
Polypropylene (PPG) 1: 1/2" Female NPT
Kynar® (PVDF) 2: 1/2" Female NPT
Groundable Acetal 2: 1/2" Female NPT
Aluminum (ADC-12) 3: 1/2" Female NPT
Stainless Steel (316) 3: 1/2" Female NPT
Air Inlet 1/4" Female NPT (includes ball valve)
Air Exhaust 3/8" Female NPT (includes silencer)
Polypropylene pumps may be fitted with ball or flat check valves. Ball-type check valves are recommended for flooded suction applications. Flat-type check valves are recommended for suction lift applications.
Kynar® and Groundable Acetal pumps are fitted with flat check valves only.
Aluminum and Stainless Steel pumps are fitted with ball check valves only.
Maximum Liquid Temperature Diaphragm Material / Temperature
Buna N: 180°F (82°C)
Neoprene: 180°F (82°C)
Santoprene® (TPO) 180°F (82°C)
EPDM: 212°F (100°C)
PTFE 212°F (100°C)
Hytrel® (TPE) 248°F (120°C)
Viton® fluoroelastomer 248°F (120°C)
Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. Kynar® pumps have a maximum temperature of 248°F (120°C) when fitted with Hytrel® or Viton® diaphragms.
Air Supply Pressure (All Models) 20 to 100 PSI (1.4 to 7 kgf/cm²)
Discharge Volume Per Cycle 0.034 gallons (128 cc)
Maximum Cycles Per Minute 400
Maximum Size Solid 1/32" (1.0 mm)
Maximum Dry Suction Lift
Flat-type check valve: 8-feet
Ball-type check valve: 5-feet
Air Motor Ryton® air motor standard