Ampco ZP1 CIP Clean In Place Positive Displacement Stainless Steel Pumps
Continuing to bring innovation to the sanitary pump market, Ampco Pumps has enhanced the traditional design of the popular ZP1 pump with the patented ZP1+ positive displacement pump. This advanced design changes the position of the static and dynamic O-rings for better performance.
The ZP1+ O-rings can be changed without disconnecting the pump from the piping system, providing simple maintenance and increased production times. The secondary sleeve/spring assembly will seal the pump if the rotors are removed for CIP.
ZP1+ Maintenance Savings
Hard to reach pumps or crowded production spaces are common and can lead to difficulties when performing daily maintenance on existing pump installations. The ZP1+ offers the ability to change O-rings simply by removing the front cover and rotors. There is no need to remove the pump from the piping.
The ZP1+ O-rings can be changed without disconnecting the pump from the piping system, providing simple maintenance and increased production times. The secondary sleeve/spring assembly will seal the pump if the rotors are removed for CIP.
ZP1+ Maintenance Savings
Hard to reach pumps or crowded production spaces are common and can lead to difficulties when performing daily maintenance on existing pump installations. The ZP1+ offers the ability to change O-rings simply by removing the front cover and rotors. There is no need to remove the pump from the piping.
ZP1+ Series Circumferential Piston Pump Features
ZP1+ Series Performance OverviewModels: 4 Max. Discharge Pressure: 225 PSI / 15.5 BAR Max Flow Rate: 452 GPM / 103 m3/hr Max Viscosity: 1,000,000 cP Seal Specifications: 2 Seal Options |
|
Available Options • Rectangular inlets • Heating jackets • Pressure relief valves • Aseptic design • Optional rotor designs • Full assemblies
• Flat body profile • Tethered wing nuts • Cover handles • Consult with engineering for additional options
|
Existing ZP1 pumps can be converted to the ZP1+ design during the remanufacturing process at no additional charge.
ZP1 vs ZP1+ new pump pricing is the same. Keep in mind fluid end parts (seals, sleeves, rotors, and body) are not interchangeable between the two series. Contact Ampco Pumps for additional information on specific seal kit pricing and more details on converting an existing ZP1 into this maintenance saving design. Ampco application engineers are always available to help determine the best solution for each processing challenge. When downtime is reduced, production benefits and so does the bottom line, the ZP1+ is built around this principle. ZP1+ Series Circumferential Piston Pump AdvantagesMaximum Uptime is Gained by Patented Pump Design Enhancements
|